National Identity Management Commission (NIMC) Recruitment |Apply Now

The Federal Government of Nigeria has received a credit from the World Bank, French Development Agency (AFD) & European Investment Bank

(EIB) and intends to apply part of the proceeds to increase the number of persons with a National ID number (NIN), which would be issued by a robust and inclusive foundational ID system to facilitate improved access to public services.

RECOMMENDED: How to Apply for Wells Mountain Initiative Scholarship 2022 for Developing Countries

Job Title: Software Engineer (Nigeria Digital Identification for Development Project)

Location: Abuja
Report To: The Technical Lead Project Coordinator in NIMC Headquarters Abuja.

Background
Of the 187 million living in Africa’s most populous country, only about 30% have had their births registered – this figure drops to 19% in rural areas and to 7% within the poorest quintile of the population. Less than 50% of residents have any form of ID card, whilst only 9% of individuals have a national ID number (NIN). Based on the Global Findex Survey results of 2018, 33% of those who do not have ID cite that it is too difficult to obtain, whilst approximately 20% cite a lack of supporting documentation.

Nigeria hosts a fragmented ID landscape which incurs significant costs on the Federal Government (FGN). Over 13 government agencies (National Identity Management Commission, National Population Commission, Central Bank of Nigeria, Independent National Electoral Commission, Nigerian Communications Commission and others) and at least 3 state agencies offer ID services in Nigeria. Many of these agencies capture biometrics and issue ID cards independently without data links with other systems, resulting in duplication and sub-optimal utilization of scarce resources.

The FGN has indicated a strong desire to harmonize the existing identification ecosystem towards developing a foundational identification platform which can be leveraged to improve service delivery. Based on completion of an initial identification ecosystem diagnostic in July 2016, the Vice President convened a workshop of all identification stakeholders in December 2016 which confirmed the need to develop a Strategic Roadmap charting the way forward. The Strategic Roadmap was then prepared with the support of the World Bank Group, and highlighted the need for a minimalist, foundational, and eco-system-based approach to identification in the country. The Roadmap was endorsed by the Harmonization Committee at a second Vice Presidential Level Workshop attended by over 200+ identification stakeholders on January 31, 2018; the group moved to submit the Roadmap to the Federal Executive Council for final government endorsement.

ALSO SEE: FG Creates $1bn Syndicated Loan For MSMEs in Nigeria

Consequently, the FGN applied for a credit from the World Bank and intends to apply part of the proceeds of the credit to increase the number of persons in Nigeria who have government-recognized proof of unique identity that enables them to access services. The Project will be implemented by the National Identity Management Commission (NIMC) based in Abuja, Nigeria. NIMC, through the Federal Ministry of Finance, has obtained a Project Preparation Advance (PPA) to enable its finance preparatory activities for the Project. Some activities shall be retroactively financed by NIMC prior to the approval of the PPA.

Trending👇

How to Apply for your Dream Job Work Permit Visa Express Entry to Canada.

FULLY FUNDED: 2022/2023 Vanier Canada Graduate Scholarships

How to Apply for York University International Student 2022/2023 Scholarships and Awards

Wells Mountain Initiative Scholarship 2022 for Developing Countries

How to Apply for 2022/2023 Queen Elizabeth Commonwealth Scholarships for Low and Middle Income Commonwealth Countries

2022 Daemen College Deans Scholarship for International Students

How To Get New Jobs in USA or Canada.

Objectives of the Assignment:

Supervision of the software design cycle
Manages functional elements within the enterprise (NIMC and enrollment partners)
Assures the software delivery functions of enrolment partners and software suppliers
Ensures software development best practices are adhered to.

Scope of Services
The Software Engineer shall:

In coordination with the Technical Lead, the software engineer will design and implement computer application systems, modules and any software components needed to support NIMC/ID4D project;
Determine the extent to which solutions perform “as required” within the current environment to ensure that future solutions meet anticipated demand;
Ensure the development of systems, module graphical interfaces, web modules, database modules and any software components needed to deliver complete and functional application systems required by the NIMC / ID4D Information Systems.
Develop application reports and statistics required by the NIMC / ID4D Information Systems;
Ensure that installations are completed on time, cost and quality, so as to minimise operational and project risk and ensure costs are contained;
Ensure that the testing and handover of implemented solutions are conducted as per organisational standards, therefore reducing the risk and adverse impact of change;
Manage conflicting and/or concurrent software upgrade, and/or refresh projects and programs;
Design and implement systems and software technical specifications based on business requirements;
Develop and maintain software documentation in order to facilitate maintenance and upgrade activities;
Provide the necessary technical support and work on a team basis to all members of the PIU to accomplish the software development and implementation tasks requested by the Technical Lead;
Contribute technical and professional knowledge and experience to improve NIMC/ID4D operations and technical platform; and Develop and provide a monthly software project status report describing the development of the above activities and any issues that may emerge, with conclusions and recommendations.

OTHER JOBS AND SCHOLARSHIPS YOU MAY WISH TO APPLY

Job Title: Biometric Architect (Nigeria Digital Identification for Development Project)

Location: Abuja
Report To: The Technical Lead in NIMC Headquarters Abuja.

Nigeria hosts a fragmented ID landscape which incurs significant costs on the Federal Government (FGN). Over 13 government agencies (National Identity Management Commission, National Population Commission, Central Bank of Nigeria, Independent National Electoral Commission, Nigerian Communications Commission and others) and at least 3 state agencies offer ID services in Nigeria. Many of these agencies, capture biometrics and issue ID cards independently without data links with other systems, resulting in duplication and sub-optimal utilization of scarce resources.

DON’T MISS OUT: World Bank Group (WGB) 2022 Graduate Internship Program | Apply Now

Consequently, the FGN applied for a credit from the World Bank and intends to apply part of the proceeds of the credit to increase the number of persons in Nigeria who have government-recognized proof of unique identity that enables them to access services. The Project will be implemented by the National Identity Management Commission (NIMC) based in Abuja, Nigeria. NIMC, through the Federal Ministry of Finance, has obtained a Project Preparation Advance (PPA) to enable it finance preparatory activities for the Project. Some activities shall be retroactively financed by NIMC prior to approval of the PPA.

Objectives of the Assignment:

Defines the requirements for the biometric capabilities within the enterprise
Defines capture requirements (modality, environment, SOPs etc.)
Ensures compliance of suppliers of biometric capture technology
Defines matching requirements
Ensures compliance of suppliers of matching technology
Assures suppliers comply with biometric requirements.

Scope of Services
The Biometric Architect shall:

Develop the technical biometric capturing requirements that would guarantee 100% success, based on the needs and objects of the ID4D project in Nigeria;
Provide input in the biometric capturing plan following detailed analysis on the different modalities of solutions (iris, face etc.) and then make appropriate suggestions for the Nigerian environment;
Recommend best-practice biometric capturing methods via which all Nigerians will be captured in a cost-effective manner;
Ensure biometric capturing plans are aligned to Nigeria’s environment and are capable of capturing required details of all individuals;
Ensure biometric technologies to be used are efficient for large scale biometric capture;
Ensure biometric technologies allow for interoperability and efficient sharing of data across the ID ecosystem;
Ensure appropriate technologies are present at ID Ecosystem partners for facilitation of biometric data sharing;
Ensure biometric technologies do not violate any security or data regulations;
Ensure technical problems encountered during biometric capturing are quickly resolved;
Provide input in the review and approval stages of the Contractor’s Biometric capturing Plan;
Serve as a technical liaison between the contractors and the ID4D team;
Monitor progress in implementation of the project’s biometric capturing plan;
Prepare progress reports on implementation of the project’s biometric capturing plan;
Carry out any other relevant periodic duties that may be assigned by the NIMC Project Implementation Unit (PIU) Technical Lead.

Reporting, Location and Time Schedules

The Biometrics Architect will report to the Technical Lead in NIMC Headquarters Abuja.
The commencement of the services shall come into force and effect on the date (the “Effective Date”) of the Client’s notice the Biometrics Architect to begin carrying out the services.

Facilities and Information to be Provided:

Adequate office space, with furniture and internet facilities, shall be assigned to the Biometrics Architect.

Estimated Effort Level and Duration of the Assignment:

The duration of the assignment is initially for 12 months but will renewed subsequently on an annual basis subject to satisfactory performance. The contract type is Time Based.

Qualifications
The Biometrics Architect shall have the following minimum educational qualifications and experience:

Relevant Degree in IT Engineering, Computer Science, or a related field with a minimum of 5 years’ experience working with biometric technologies
Expertise in multi-modal biometric capture technologies (e.g. facial, fingerprint, iris)
Expertise in biometric matching technologies (e.g. ABIS)
Experience in the use of biometric technologies in the field including challenging remote environment
Experience defining system architectures & performance requirements in support of biometrics; and analysing existing or proposed architectures for applicability and suitability
Experience analysing system performance of biometric tools in terms of project goals and end-user needs; and system performance in terms of capacity and throughput
Experience defining operational and functional and technical approaches for interfacing with other biometrics partners, including proposed interfaces, multiple network considerations, data quality, and data processing in terms of capacity and throughput and biometric tools
Experience recommending approaches to improve identity assurance processes through improvement of biometrics capture and matching technologies
Relevant degree in IT Engineering, Computer Science, or a related field
Experience in working for any international donor-funded program will be considered an asset
Experience in projects involving multiple partner institutions will be considered an asset
Fluency in written and spoken English. Local languages are an asset.

Detailed Skills And Experience:
Area – Description:

Identify biometric requirements – Ability to define and develop biometric requirements based upon the unique nature of different environments, the use cases. Defines the standard operational processes for biometric capture in line with the core use cases and exceptions (for instance enrolling children).
Business requirements – Able to interpret complex business and technical requirements. Can identify and recognise a viable solution or controls to issues. Understands and links complex challenges in the enrollment environment and translates them into architectures, requirements and procedures.
Define modality requirements – Experienced in defining solutions across different modalities (face, fingerprint and Iris). Able to determine the optimal modality for the use case and environments
Experience of ABIS – Experienced in biometric matching at population scale, for instance the core functions, specifications, limitations of ABIS solutions.

How to Apply
Interested and qualified candidates should:
Click here to fill Application Form

Click here for more information (Document)

Application Deadline Monday, 4:00 PM: 20th December, 2021.

Application Documents

The Application Form will include (i) A detailed CV and; (ii) Copies of Certificates for Professional and Academic Qualifications, all in Doc, RTF or PDF format.