See Also: Latest Vacancies at Lafarge Africa Plc
Job Title: Electrical Engineer (UPS & Battery Charger Units)
Location: Nigeria
Description
- Supervise the UPS and Battery charger major maintenance and or repair activities.
- Supervise testing of UPS and Battery charger units.
- Supervise Battery bank Discharge tests as per COMPANY procedure.
- carry out the modifications in power and control components as per COMPANY’s instructions.
Requirements
- Bachelor’s Degree in Electrical, Instrumentation & Control System Engineering.
- Minimum of 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of UPS Units, and Battery Chargers and Rectifiers.
- Must have knowledge of UPS Units ( Cyberex / CHLORIDE )
- Good interpersonal skills and exposure/experience to Offshore platforms.
- Strong written and verbal communication skills.
- Willing to work on short-term (2 weeks) – medium-term (6 months) commissioning/services.
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Job Title: Protective Relays, Potential & Current Transformers Specialist
Location: Nigeria
Description
- Protective relay testing as per COMPANY-supplied Test procedures and provide test sheets.
- Wiring changes required for relay testing in protective circuits and record the changes and normalize the changes after testing. Wires shall be provided by COMPANY.
- Integrity tests and performance tests for potential transformers and current transformers as per COMPANY-supplied Test procedures.
- Firmware upgrades to protective relays as required.
- Protection settings uploaded as per the latest relay setting Table.
- Modifications in power and control components as per COMPANY’s instructions.
Requirements
- Bachelor’s Degree in Electrical, Instrumentation & Control System Engineering.
- Minimum of 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, and certification services of Relays and Current Transformer / Potential Transformer
- Good interpersonal skills and exposure/experience to Offshore platforms.
- Strong written and verbal communication skills.
- Willing to work on short-term (2 weeks) – medium-term (6 months) commissioning / services.
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Check Also: Niger State College of Nursing Sciences Massive Recruitment
Job Title: Senior Engineer (HVAC)
Location: Nigeria
Description
- This position initially offers 01-year contract (Extendable).
- As a Sr. Engineer HVAC (Heating, Ventilation, and Air Conditioning), you will be responsible for;
- Providing technical expertise and support and delivering requirements for CSU in accordance with industry best practices.
- Supporting and advising punch listing of systems and closeout of punch list items.
- Execution of the Commissioning & Start-Up Plan and Commissioning Execution Plan.
- Providing input to Commissioning Procedures, including Systems Testing Procedures.
- Assisting and contributing to Flawless start-up.
- Supporting the Project to Asset Handover strategy to align with Operations handover requirements.
- Providing quality assurance and coaching on systems acceptance and punch listing activities undertaken by the Operations team.
- Participating in peer reviews on startup and operating procedures.
- Working closely with Project and Operations personnel to meet the commissioning and start-up milestones.
- Liaisoning with the Company’s project and contractor teams.
- Ensuring risks to the CSU schedule are identified and raised early.
- Assisting to Produce punch lists, acceptance documentation, and site and technical queries.
- Assisting to ensure close out of outstanding work and punch items, prior to systems being accepted for commissioned.
- Providing input to the CSU Safety Strategies and promoting safe practice for personnel and safe operation of production assets.
- Working daily in the operating worksites, leading improvements by maintaining full compliance with PPE and safety standards in challenging conditions.
- Ability to work effectively with all different functions in the JV and with Project Teams.
- Obtaining equipment maintenance information including status, results, etc., in a site with minimal original construction or maintenance records.
- Physically challenging working environment.
- SimOps support.
Requirements
- Technical Certifications, 10+ years experience in the gas and oil industry, minimum 5 years in a senior position, CSU experience essential.
- Good technical communication skills.
- Ability to interact with members of projects, contractors and the Company’s asset teams.
- Capable of giving direction and guidance on CSU planning & reporting.
- Good understanding of HVAC systems, facility integrity and Process Safety.
- Good understanding of commissioning, and startup.
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Check Out: Massive Career Opportunities for Non-Academic Staffs at Federal Polytechnic Nekede
Job Title: Steam & Critical Power Generators Specialist
Location: Lagos
About the Position
- Supervise the generator’s major overhaul and or repair activities.
- Supervise the testing and commissioning activities of the Generators.
- Propose the modifications required for the safe and reliable operation of the generators.
- Provide SOW and a Bill of materials required to execute the modification. Upon COMPANY approval, the Specialist shall supervise the execution of modifications.
- Study the power system operation and control system of generators and provide the modification required in the control system.
- Execute the modifications required in the control system upon COMPANY approval test the modification for successful implementation and provide a report on the modifications executed.
Requirements
- Bachelor’s Degree in Electrical, Instrumentation & Control System Engineering.
- Minimum of 10 Years of experience in the Installation, overhaul, repair, tuning, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of Steam & Critical Power Generators
- Must have knowledge of GE turbine Generators and MUSTANG/CATERPILLAR Critical Power Generators
- Good interpersonal skills and exposure/experience to Offshore platforms.
- Strong written and verbal communication skills.
- Willing to work on short-term (2 weeks) – medium-term (6 months) commissioning/services
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
You May Like: Current Vacancies at Flutterwave
Job Title: Switch Boards and Motor Control Centres Specialist
Location: Nigeria
About the Position
- Supervise the major maintenance and or repair activities of Switchboards and Motor Control centers.
- Supervise the testing and commissioning activities of the Switchboards and Motor Control centers.
- Propose the modifications required for safe and reliable operation of the Switchboards and Motor Control centers.
- Provide SOW and Bill of materials required to execute the modification. Upon COMPANY approval, the Specialist shall supervise the execution of modifications.
- Study the power system operation and control system of generators and provide the modification required in the control system.
- Execute the modifications required in the control system upon COMPANY approval test the modification for successful implementation and provide a report on the modifications executed.
Requirements
- Bachelor’s Degree in Electrical, Instrumentation & Control System Engineering.
- Minimum of 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of MV / LV switchboards, and MCCs, along with MV Motors.
- Must have knowledge of SwitchBoards and MCCs ( POWELL & Rockwell ) and MV Motors ( GE, SIEMENS)
- Good interpersonal skills and exposure/experience to Offshore platforms.
- Strong written and verbal communication skills.
- Willing to work on short-term (2 weeks) – medium-term (6 months) commissioning/services
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Job Title: Transformers Specialist
Location: Nigeria
About The Position
- Supervise the Transformer’s major overhaul and or repair activities.
- Assist in Transformer oil test procedures, Analyze the oil test results, and recommend the corrections required.
- Supervise the Transformer oil filtration activities.
- Supervise the testing of Transformer inbuilt protections.
- Propose the modifications required for safe and reliable operation of the Transformers.
- The specialist shall provide SOW and a Bill of materials required to execute the modification. Upon COMPANY approval, the Specialist shall supervise the execution of modifications.
- Execute the modifications required in the Transformers. Upon COMPANY approval test the modification for successful implementation and provide a report on the modifications executed.
Requirements
- Bachelors in Electrical, Instrumentation & Control System Engineering.
- Minimum of 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of MV, LV Transformers
- Must have knowledge of PROLEC Transformers
- Good interpersonal skills and exposure/experience to Offshore platforms.
- Strong written and verbal communication skills.
- Willing to work on short-term (2 weeks) – medium-term (6 months) commissioning/services
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Also See: Latest Employment at Stanbic IBTC Bank
Job Title: Project Manager – ICSS
Location: Lagos
About The Position
- We are looking for an energized and capable professional for the role of an ICSS Project Manager for a project that shall be executed in Lagos Nigeria, the primary objective of a Project Manager is to ensure that the project is completed within the defined scope, time, cost, and quality constraints.
- Completely responsible for the Profit and Loss of the project
- Leading the management, claim, and progress meetings with customers and internal stakeholders.
- Project team selection and hiring
- Reviews progress reports
- Liaise effectively with procurement and keep a live procurement register. Reviews and approves all Purchase Orders and Subcontracts.
- Review of Customer comments on critical documentation along with respective discipline leads
- Manages subcontractors
- Financial visibility of the project. Maintenance of Financial control sheets.
- Ensure that all assigned projects are delivered with high-quality deliverables as per schedule, within the scope, and within budget
- Understand and confirm all contractual (commercial and technical) requirements of the project
- Developing project scopes and objectives, involving all relevant stakeholders, and ensuring technical feasibility
- Ensure effective resource utilization and allocation of project tasks. Perform/manage Team HRD to cover any skill gaps
- Coordinate internal resources and third parties/vendors for the flawless execution of projects
- Prepare project plan/schedule using tools and processes adopted by INTECH and manage it during the execution of the project
- Manage project procurement with the support of the Supply chain/procurement department
- Use appropriate verification techniques to manage changes in project scope, schedule, and costs
- Develop project quality plan and perform quality assurance as well as quality control
- Measure project performance using appropriate systems, tools, and techniques as adopted by INTECH
- Report and escalate to the INTECH management and customer/End User/project stakeholders as needed
- Perform project closure
- Manage the relationship with the client and all stakeholders
- Perform risk management to minimize/mitigate project risks
- Establish and maintain relationships with third parties/vendors
- Watch the Company’s interest and ask for fair Change Orders, when appropriate. Maintain claim management and invoicing files.
- Observe Company Quality Management System (QMS) requirements
Requirements
- Bachelor’s / Master’s Degree in the Engineering field professional experience of 15+ years minimum
- Minimum of 8-10 years of project management experience in international projects & engineering of Instrument & Control Systems
- Working experience in TOTAL projects preferred.
Skills / Competencies:
- Excellent verbal and written English
- Excellent leadership skills. A proactive approach is required throughout the project.
- Good communication, presentation, persuasion, negotiation, and interpersonal skills
- Decision-making quality based on analysis, wisdom, experience, and judgment
- In-depth knowledge and understanding of project planning, process optimization, and information management systems. Excellent grip on project schedule, expediting measures are required.
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Check Also: National Institute of Information Technology Latest Vacancies
Job Title: Senior Automation Engineer
Location: Port Harcourt, Rivers
About the Position
- INTECH Process Automation Nigeria Limited (IPANL) has been delivering industrial automation and control system solutions to Nigerian Oil and gas and petrochemicals for the past 20 years. IPANL is part of a multinational organization with having a strong worldwide presence.
- We are a neutral System Integrator providing solutions and services on major DCS/PLC/ F&G and SCADA systems.
- IPANL is looking for highly motivated, energetic, career-oriented, and skillful individuals to become part of its professional team.
Roles & Responsibilities
- Hardware Designing & Implementation for Specialized Control Systems including DCS, SIS & FGS with expertise on Allen Bradley Systems. (Yokogawa & Foxboro system will be an advantage)
- Related experience on Wellhead Facilities including Wellhead Control Panels, Skids, Solar System will be an advantage
- Well Aware of/Have Conceptual Understanding of Major Industrial Standards being Followed
- Understanding of Major Instrumentation being Used and Clarity on the Working Principle
- Understands/Able to gather required Information from Customer Specifications (including Functional Requirement Specifications, P&IDs, C&Es, Drawings, Narratives, Philosophies etc.)
- Software Designing & Implementation, with Expertise on Allen Bradley PLC (Yokogawa & Foxboro System will be an Advantage)
- Have carried out System Testing & FAT
- Have been involved in Site Works including Installations Supervision, Commissioning & Startups Activities
Requirements
- Bachelor’s / Master’s Degree in Engineering or in related field
- Minimum 5+ years of work experience in Industrial Automation & Controls Allen Bradley PLC (Yokogawa & Foxboro System will be an advantage)
- Hands-on Experience in Microsoft Office (Word, Excel, PowerPoint)
- Must have Effective Written/Verbal Communication Skills
Application Closing Date
Not Specified.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Note: This position is for Nigerian National only
RECOMMENDED JOB SEARCH
Keep visiting our website regularly for more updates, If There’s any question you have regarding this Scholarship and other jobs alerts, feel free to use the comment box below and we will attain to it. Thanks
Or join our WhatsApp group For More Job, Grants and Scholarships Update
Kindly Share, you might help someone achieve this great opportunity